10m usb cable with repeater, still no Power need help

Your problem isn't the active data. It's the power draw that cannot travel that distance over a USB cable. USB isn't a great power deliver cable format because the gauge size of the wires is small and attenuation builds up very quickly.

You can do this. But, be prepared to spend upwards of $150-200 to get it done.

First find out the power draw that your controller requires to operate. It'll be DC power.

Then, Call C2G (Cables to Go) and tell them that you need to run a POWERED USB A-B Cable to an electronic device 10m away and you need xyz level of DC power at the FAR END delivered via the USB cable.

I'm guessing it's going to be a powered fiber optic cable with a tandem power wire and injector.

/r/DJs Thread