Hey everyone I have a question if anyone reads this. Will the steps be the same for the supercarrier as this too:

The steps are: Contact the carrier on the correct radio frequency using COMM 1 or COMM 2 and select the ATC option. From the ATC selections, select Inbound. Enter the correct Link 4 frequency from D/L. From the HSI page, enable ACL. Fly a Case III as before, and at 5.5 nm (should be gear down, flaps down, hook down, and on-speed) select AP (autopilot) from the UFC (Upfront Controller) and select the CPL option on the UFC. Once coupled, you can press the paddle switch to uncouple and manually fly the approach on Mode 1A.

Because this sounds like something good