Here's the show VLANs output. it could be a NAT'ing issue, but I'd think that since I can route all the traffic between the vlans except the default one, it would make sense to my brain that it should be able to route to that one as well without anything extra, but I'm probably wrong.

root@EX2200> show vlans

Name Tag Interfaces

Arctis_Tor 25

ge-0/0/0.0, ge-0/0/2.0*

DMZ 95

None

guest-Wifi 30

ge-0/0/0.0, ge-0/0/2.0*

Wired-Home 10

ge-0/0/0.0, ge-0/0/2.0*

Wireless-Home 15

ge-0/0/0.0, ge-0/0/2.0*

default

ge-0/0/1.0*, ge-0/0/3.0, ge-0/0/4.0, ge-0/0/5.0, ge-0/0/6.0, ge-0/0/7.0*, ge-0/0/8.0, ge-0/0/9.0, ge-0/0/10.0, ge-0/0/11.0, ge-0/0/12.0, ge-0/0/13.0, ge-0/0/14.0,

ge-0/0/15.0, ge-0/0/16.0, ge-0/0/17.0, ge-0/0/18.0, ge-0/0/19.0, ge-0/0/20.0, ge-0/0/21.0, ge-0/0/22.0, ge-0/0/23.0, ge-0/0/24.0, ge-0/0/25.0, ge-0/0/26.0*,

ge-0/0/27.0, ge-0/0/28.0*, ge-0/0/29.0, ge-0/0/30.0, ge-0/0/31.0, ge-0/0/32.0, ge-0/0/33.0, ge-0/0/34.0, ge-0/0/35.0, ge-0/0/36.0*, ge-0/0/37.0, ge-0/0/38.0,

ge-0/0/39.0*, ge-0/0/40.0*, ge-0/0/41.0, ge-0/0/42.0, ge-0/0/43.0, ge-0/0/44.0, ge-0/0/45.0, ge-0/0/46.0*, ge-0/0/47.0, ge-0/1/3.0