A friend of mine said this is what he used to do.

(Large black cap locks) - First pop off ring under black cap with screw driver then grab your a flat head screw driver then on one side is a black flap and across the other is a small black flap, push screwdriver up inside black flap and pull down with screwdriver while pulling up on cap with other hand and it will slide off.

(The ring alarm which tightens) Hold bottle and put your flat head screwdriver in-between bottle and where the alarm connects where screw driver is a few inches past and pull back then it pops off easily.

(Large plastic see through alarm on cap) Hold the bottle and under the plastic cap is a small grey peice of plastic with a u shap towards bottle, grab flat head screw driver and pop it out. Then hold bottle push screwdriver up inside and push top green peice back which is pressed against bottle then pull off while holding mechanism back.

(Black spider wrap on alcohol box) Hold box and put your small flat head screwdriver under top spider wrap line and push all the way to side, then slide it off.

(Big necklace oval alarm) - Don't mess with it, very sensitive will go off with being tapped. If you absolutely must need the bottle then carefully place it where it won't hit anything until your where your comfortable then grab your small dikes and cut it, quickly grab a playdough/stuffed animal which you cut a hole in the bottom. take playdough out and wrap around the alarm then shove inside stuffed animal and there won't be any noise.