LPT: If you buy a new candle, make sure to burn the candle initially for 1 hour per every 1 inch diameter. This will ensure that the top layer of the wax is burned equally and will give you the maximum lifespan for the candle.

"1.5" PILLARS: Burn a minimum of one hour before extinguishing the flame. 2" PILLARS: Burn a minimum of 1 1/2 hours before extinguishing the flame. 2.5" PILLARS: Burn a minimum of three hours before extinguishing the flame. 3" PILLARS: Burn a minimum of five hours before extinguishing the flame. 4" PILLARS: Burn a minimum of eight hours before extinguishing the flame. 6" PILLARS: For our 6” diameter pillars, light all three wicks and burn the candle continuously at least 5 hours. Trim wick to 3/8” before each lighting.

After extinguishing the flame, allow the edges to cool to warm. Gently mold the edges inward with damp fingers. Straighten and trim wick to 3/8” before each lighting. Keep out of drafts to prevent one side of the wax dam from melting through and dripping."

/r/LifeProTips Thread