I have been doing a ton of research the past few days. I just ordered an HLG600-48A with 10 F564B strips (they run at 43-48V so the 48A driver is better suited to the strips). I will be running them in parallel. I also ordered 10 2" wide heatsink strips from heatsinkusa. With this driver and 10 strips i can put out the same amount of light as 4 quantum boards and run it more efficiently at around 100mA per LED (900mA per strip). I can also turn it up to a max of about 138mA per diode. Look at the datasheets when comparing strips to quantum boards, as the strips are configured a little differently even though they use the same LED and same total amount per 2 strips.