What is your parts list? Consider formatting your parts list.
Type | Item |
---|---|
Case | NZXT S340 Mid Tower Case |
CPU | Intel Core i5-4460 LGA 1150 CPU |
CPU Cooler | Stock i5-4460 Cooler |
Motherboard | ASRock ATX DDR3 1333 LGA 1150 FATAL1TY Z97 KILLER Motherboard |
Memory | G.Skill F3-12800CL9D-8GBXL 8GB (2 x 4GB) DDR3 PC3-12800 RipjawsX Series |
PSU | EVGA SuperNOVA 650 G1 80+ GOLD, 650W |
GPU | Sapphire 11244-01-20G Radeon NITRO R9 390 8GB GDDR5 DVI-D/HDMI with Back Plate (UEFI) |
Describe your problem. List any error messages and symptoms. Be descriptive.
Upon trying to boot the computer up for the first time, the power LED light blinked one time and then went off. Nothing else happened. But if I plug my mouse into a USB port, it starts glowing so it is receiving some power.
List anything you've done in attempt to diagnose or fix the problem.
I've checked the cable connections, read the instructions, read troubleshooting posts where people had problems sounding similar to mine, watched Youtube videos, and I feel like there's something I'm just not grasping.
Post relevant photos of build/parts here.
Close up of the System Panel Header
Key for the numbers on the above pictures
Picture of my actual build, the top part
Picture of my actual build, the lower part
Provide any additional details you wish below.
The manual for my case lists the following chassis wires: the two for the fan, HDD LED, PLED -, PLED +, POWER SW, and RESET SW. Looking at the System Panel Header diagram above I've got them plugged into the motherboard as follows:
PLED + , PLED - , POWER SW (occupying the PWRBTN# and GND pin)
HDLED (Occupying both the HDLED - and HDLED + pins)
There is no RESET SW cable to be found to plug beside the HDLED. And it leaves nothing to be plugged into the Power LED Header. I don't know why but I can't reconcile all of this information in my head and it's really confusing me. I'm sorry if this explanation is a mess.