Some great Garfield Kart fan-art

Troubleshooting Help:

What is your parts list? Consider formatting your parts list.

Type Item
Case NZXT S340 Mid Tower Case
CPU Intel Core i5-4460 LGA 1150 CPU
CPU Cooler Stock i5-4460 Cooler
Motherboard ASRock ATX DDR3 1333 LGA 1150 FATAL1TY Z97 KILLER Motherboard
Memory G.Skill F3-12800CL9D-8GBXL 8GB (2 x 4GB) DDR3 PC3-12800 RipjawsX Series
PSU EVGA SuperNOVA 650 G1 80+ GOLD, 650W
GPU Sapphire 11244-01-20G Radeon NITRO R9 390 8GB GDDR5 DVI-D/HDMI with Back Plate (UEFI)

Describe your problem. List any error messages and symptoms. Be descriptive.

Upon trying to boot the computer up for the first time, the power LED light blinked one time and then went off. Nothing else happened. But if I plug my mouse into a USB port, it starts glowing so it is receiving some power. I suppose my basic, distilled question is after looking at my chart below and the pictures, can you tell if I've plugged anything up incorrectly?

List anything you've done in attempt to diagnose or fix the problem.

I've checked the cable connections, read the instructions, read troubleshooting posts where people had problems sounding similar to mine, watched Youtube videos, and I feel like there's something I'm just not grasping.

Post relevant photos of build/parts here.

Motherboard layout

Close up of the System Panel Header

Key for the numbers on the above pictures

System Panel Header diagram

Power LED Header diagram

Picture of my actual build, the top part

Picture of my actual build, the lower part

Provide any additional details you wish below.

Cord Header Number on Motherboard picture
GPU Plugged into PCIE2 N/a
RAM Plugged into 1st and 3rd slot 5
Chassis Fans Plugged into CHA_FAN2 and CHA_FAN3 26 and 27
Chassis HD Audio Plugged into the Front Panel Audio Header 21
Chassis USB 3 Plugged into USB3_4_5 8
SATA from HDD Plugged into SATA3_2 10
Stock Cooler Plugged into CPU_FAN1 4
PSU CPU1 power Plugged into ATX 1
PSU SATA power Plugged into HDD N/a
PSU MB power Plugged into ATX 7
PSU VGA1+VGA2 Plugged into GPU N/a

The manual for my case lists the following chassis wires: the two for the fan, HDD LED, PLED -, PLED +, POWER SW, and RESET SW. Looking at the System Panel Header diagram above I've got them plugged into the motherboard as follows:

PLED + , PLED - , POWER SW (occupying the PWRBTN# and GND pin)

HDLED (Occupying both the HDLED - and HDLED + pins)

There is no RESET SW cable to be found to plug beside the HDLED. And it leaves nothing to be plugged into the Power LED Header. I don't know why but I can't reconcile all of this information in my head and it's really confusing me. I'm sorry if this explanation is a mess.

/r/garfieldkart Thread Link - i.imgur.com