Sure. I've been dinking around with my own profiles, but I don't know if they are in this one..
avoidcrossing_perimeters = 0 bed_custom_model = bed_custom_texture = bed_shape = 0x0,220x0,220x220,0x220 bed_temperature = 60 before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n between_objects_gcode = bottom_fill_pattern = rectilinear bottom_solid_layers = 3 bridge_acceleration = 0 bridge_angle = 0 bridge_fan_speed = 100 bridge_flow_ratio = 0.95 bridge_speed = 25 brim_width = 0 clip_multipart_objects = 1 colorprint_heights = compatible_printers_condition_cummulative = "printer_model==\"ENDER3\" and nozzle_diameter[0]==0.4"; complete_objects = 0 cooling = 1 cooling_tube_length = 5 cooling_tube_retraction = 91.5 default_acceleration = 0 default_filament_profile = "Creality PLA" default_print_profile = 0.20mm NORMAL deretract_speed = 40 disable_fan_first_layers = 1 dont_support_bridges = 1 duplicate_distance = 6 elefant_foot_compensation = 0 end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+10, max_print_height)} F600{endif} ; Move print head up\nG1 X0 Y200 F3000 ; present print\nM84 X Y E ; disable motors ensure_vertical_shell_thickness = 1 external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 25% external_perimeters_first = 1 extra_loading_move = -2 extra_perimeters = 1 extruder_clearance_height = 25 extruder_clearance_radius = 45 extruder_colour = #FFFF00 extruder_offset = 0x0 extrusion_axis = E extrusion_multiplier = 1 extrusion_width = 0.45 fan_always_on = 0 fan_below_layer_time = 60 filament_colour = #29B2B2 filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 0 filament_density = 0 filament_deretract_speed = nil filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 0 filament_minimal_purge_on_wipe_tower = 15 filament_notes = "" filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = nil filament_settings_id = "MINE STD" filament_soluble = 0 filament_toolchange_delay = 0 filament_type = PLA filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_vendor = (Unknown) filament_wipe = nil fill_angle = 45 fill_density = 40% fill_pattern = grid first_layer_acceleration = 0 first_layer_bed_temperature = 60 first_layer_extrusion_width = 0.42 first_layer_height = 0.2 first_layer_speed = 20 first_layer_temperature = 225 gap_fill_speed = 20 gcode_comments = 0 gcode_flavor = marlin gcode_label_objects = 0 high_current_on_filament_swap = 0 host_type = octoprint infill_acceleration = 0 infill_every_layers = 2 infill_extruder = 1 infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% infill_speed = 50 inherits_cummulative = "0.20mm NORMAL @ENDER3";; interface_shells = 0 layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] layer_height = 0.2 machine_max_acceleration_e = 5000 machine_max_acceleration_extruding = 500 machine_max_acceleration_retracting = 1000 machine_max_acceleration_x = 500 machine_max_acceleration_y = 500 machine_max_acceleration_z = 100 machine_max_feedrate_e = 60 machine_max_feedrate_x = 500 machine_max_feedrate_y = 500 machine_max_feedrate_z = 10 machine_max_jerk_e = 5 machine_max_jerk_x = 8 machine_max_jerk_y = 8 machine_max_jerk_z = 0.4 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 max_fan_speed = 70 max_layer_height = 0.25 max_print_height = 250 max_print_speed = 100 max_volumetric_speed = 0 min_fan_speed = 35 min_layer_height = 0.1 min_print_speed = 10 min_skirt_length = 4 notes = nozzle_diameter = 0.4 only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = {input_filename_base}{layerheight}mm{filamenttype[0]}{printermodel}{print_time}.gcode overhangs = 1 parking_pos_retraction = 92 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 perimeter_speed = 80 perimeters = 2 post_process = print_host = print_settings_id = 0.20mm NORMAL @ENDER3 - Autospeed Mine printer_model = ENDER3 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3 printer_settings_id = Creality ENDER-3 printer_technology = FFF printer_variant = 0.4 printer_vendor = printhost_apikey = printhost_cafile = raft_layers = 0 remaining_times = 0 resolution = 0 retract_before_travel = 2 retract_before_wipe = 70% retract_layer_change = 1 retract_length = 5 retract_length_toolchange = 1 retract_lift = 0 retract_lift_above = 0 retract_lift_below = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 60 seam_position = nearest serial_port = serial_speed = 250000 silent_mode = 0 single_extruder_multi_material = 0 single_extruder_multi_material_priming = 1 skirt_distance = 2 skirt_height = 2 skirts = 1 slice_closing_radius = 0.049 slowdown_below_layer_time = 5 small_perimeter_speed = 40% solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.45 solid_infill_speed = 60% spiral_vase = 0 standby_temperature_delta = -5 start_filament_gcode = "; Filament gcode\n" start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0.0\nG1 Y190 E15.0 F1500.0 ; intro line\nG1 X2.3 F5000\nG1 Y10 E30 F1200.0 ; intro line\nG92 E0.0 support_material = 1 support_material_angle = 0 support_material_auto = 1 support_material_buildplate_only = 0 support_material_contact_distance = 0.15 support_material_enforce_layers = 0 support_material_extruder = 0 support_material_extrusion_width = 0.38 support_material_interface_contact_loops = 0 support_material_interface_extruder = 0 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 support_material_interface_speed = 80% support_material_pattern = rectilinear support_material_spacing = 2 support_material_speed = 60 support_material_synchronize_layers = 0 support_material_threshold = 45 support_material_with_sheath = 0 support_material_xy_spacing = 60% temperature = 225 thin_walls = 0 threads = 8 thumbnails = toolchange_gcode = top_fill_pattern = rectilinear top_infill_extrusion_width = 0.4 top_solid_infill_speed = 25% top_solid_layers = 3 travel_speed = 150 use_firmware_retraction = 0 use_relative_e_distances = 1 use_volumetric_e = 0 variable_layer_height = 1 wipe = 1 wipe_into_infill = 0 wipe_into_objects = 0 wipe_tower = 0 wipe_tower_bridging = 10 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 170 wipe_tower_y = 140 wiping_volumes_extruders = 70,70 wiping_volumes_matrix = 0 xy_size_compensation = 0 z_offset = 0